In February 2022 we observed the technique of putting the shellcode into Windows event logs for the first time “in the wild” during the malicious campaign. It allows the “fileless” last stage Trojan to be hidden from plain sight in the file system. Such attention to the event logs in the campaign isn’t limited to storing shellcodes. Dropper modules also patch Windows native API functions, related to event tracing (ETW) and anti-malware scan interface (AMSI), to make the infection process stealthier.
Besides event logs there are numerous other techniques in the actor’s toolset. Among them let us distinguish how the actor takes initial recon into consideration while developing the next malicious stages: the C2 web domain name mimicking the legitimate one and the name in use belonging to the existing and software used by the victim. For hosting the attacker uses virtual private servers on Linode, Namecheap, DreamVPS.
One more visible common approach is the use of a lot of anti-detection decryptors. Actor uses different compilers, from Microsoft’s cl.exe or GCC under MinGW to a recent version of Go. Also, to avoid detection, some modules are signed with a digital certificate. We believe it is issued by the actor, because our telemetry doesn’t show any legitimate software signed with it, only malicious code used in this campaign.
Regarding last stage Trojans: the actor decided not to stick to just one – there are HTTP and named pipe based ones. Obviously besides the event logs the actor is obsessed with memory injection – lots of RAT commands are related to it and are used heavily. Along with the aforementioned custom modules and techniques, several commercial pentesting tools like Cobalt Strike and NetSPI (ex-SilentBreak) are used.
Actually, as we don’t have commercial versions of the latter it’s hard to say which enumerated techniques came from the product and which are home-brewed. For sure, third-party code from GitHub is also in use: we registered at least BlackBone for legitimate processes in memory patching.
The infection chain
We started the research from the in-memory last stager and then, using our telemetry, were able to reconstruct several infection chains. What piqued our attention was the very targeted nature of the campaign and the vast set of tools in use, including commercial ones.
The variety of the campaign’s techniques and modules looks impressive. Let us divide it into classes to technically describe this campaign. Actually, we need to cover the following sets of modules: commercial pentesting suites, custom anti-detection wrappers around them and last stage Trojans.
|Commercial tool sets||SilentBreak|
|Anti-detection wrappers||Go decryptor with heavy usage of the syscall library. Keeps Cobalt Strike module encoded several times, and AES256 CBC encrypted blob. We haven’t previously observed Go usage with Cobalt Strike|
|A library launcher, compiled with GCC under MinGW environment. The only possible reason for this stage is anti-detection|
|AES decryptor, compiled with Visual Studio compiler|
|Last stage RAT||HTTP-based Trojan. Possible original names are ThrowbackDLL.dll and drxDLL.dll, but code is more complex than old publicly available version of SilentBreak’s Throwback|
|Named pipes-based Trojan. Possible original names are monolithDLL.dll and SlingshotDLL.dll. Based on file names there is a possibility that last stage modules are parts of a commercial Slingshot version|
Once again, some modules which we consider custom, such as wrappers and last stagers, could possibly be parts of commercial products. So now after some classification we are ready to analyze modules one by one.
The earliest phase of attack we observed took place in September 2021. The spreading of the Cobalt Strike module was achieved by persuading the target to download the link to the .rar on the legitimate site file.io, and run it themselves. The digital certificate for the Cobalt Strike module inside is below (during the campaign with the same one, 15 different stagers from wrappers to last stagers were signed):
Organization: Fast Invest ApS
Thumbprint 99 77 16 6f 0a 94 b6 55 ef df 21 05 2c 2b 27 9a 0b 33 52 c4
Serial 34 d8 cd 9d 55 9e 81 b5 f3 8d 21 d6 58 c4 7d 72
Due to the different infection scenarios for all the targeted hosts we will describe just one of the observed ones. Having an ability to inject code into any process using Trojans, the attackers are free to use this feature widely to inject the next modules into Windows system processes or trusted applications such as DLP.
Keeping in mind truncated process injections, and even mimicking web domain registration, we could describe the attack process as quite iterative: initial recon with some modules and then preparation of additional attacks.
Regarding the commercial tools, traces of SilentBreak and Cobalt Strike toolset usage in this campaign are quite visible. Trojans named ThrowbackDLL.dll and SlingshotDLL.dll remind us of Throwback and Slingshot, which are both tools in SilentBreak’s framework, while the “sb” associated with the dropper (sb.dll) could be an abbreviation of the vendor’s name.
Here we want to mention that several .pdb paths inside binaries contain the project’s directory C:Usersadminsourcereposdrx and other modules not named after SilentBreak, such as drxDLL.dll. However, encryption functions are the same as in the publicly available Throwback code.
For the anti-detection wrappers, different compilers are in use. Besides MSVC, Go compiler 1.17.2 and GCC under MinGW have been used. Decryptors differ a lot; the features they contain are listed in the table below:
|Several compilers||The same AES256 CBC decryption could be done with Go and C++ modules|
|Whitelisted launchers||Autorunned copy of WerFault.exe maps the launcher into process address space|
|Digital certificate||15 files are signed with “Fast Invest” certificate. We didn’t observe any legitimate files signed with it|
|Patch logging exports of ntdll.dll||To be more stealthy, Go droppers patch logging-related API functions like EtwEventWriteFull in self-address space with empty functionality|
|Keep shellcode in event logs||This is the main innovation we observed in this campaign. Encrypted shellcode with the next stager is divided into 8 KB blocks and saved in the binary part of event logs|
|C2 web domain mimicking||Actor registered a web domain name with ERP in use title|
This layer of infection chain decrypts, maps into memory and launches the code. Not all of them are worth describing in detail, but we will cover the Go decryptor launcher for Cobalt Strike. All corresponding hashes are listed in the appendix.
Function names in the main package are obfuscated. Main.init decodes Windows API function names from kernel32.dll and ntdll.dll libraries (WriteProcessMemory and other functions) related to event log creation. Each of these names in the binary are base64-encoded four times in a row. Using WriteProcessMemory, the dropper patches with “xor rax, rax; ret” code the following functions in memory: EtwNotificationRegister, EtwEventRegister, EtwEventWriteFull, EtwEventWriteFull, EtwEventWrite.
In Main.start the malware checks if the host is in the domain and only works if it’s true. Then it dynamically resolves the addresses of the aforementioned functions. The next stager is encrypted with AES256 (CBC mode), the key and IV are encoded with base64.
With such an approach, it requires the researcher to code some script to gather the encrypted parts of the next module. After decryption, to get the final portable executable, data has to be converted further.
Last stager types
Last stagers have two communication mechanisms – over HTTP with RC4 encryption and unencrypted with named pipes. The latter way is technically able to communicate with any network visible external host, but under Windows named pipes are built upon the SMB protocol, which would barely open for external networks. So these modules most probably serve for lateral movement.
|Feature||HTTP-based trojan||Named pipes-based trojan|
|C2 communication||Active connection to a randomly chosen C2 from a hardcoded list||Passive mode|
|Self version in beacon||1.1||No|
|Natural language artifacts||Unused argument “dave”||No|
|Command set||Quite basic, 7 of them||More profound, 20 of them|
|Injection functionality||Yes and much in use||Yes and much in use|
|Quite unusual among the commands||Sleep time randomization: (random between 0,9 – 1,1) * sleep time||Get minutes since last user input|
After this introduction into the set of malware, we will now describe the infection chain: dropper injection with Cobalt Strike pentesting suite.
Dropper in DLL, search order hijacking
We start custom module analysis from the wrapper-dropper dynamic library. This code is injected into Windows processes such as explorer.exe. At its single entry point after being loaded into the virtual address space of the launcher process, the dropper removes files created by previous stages or executions.
Firstly, the module copies the original legitimate OS error handler WerFault.exe to C:WindowsTasks. Then it drops one of the encrypted binary resources to the wer.dll file in the same directory for typical DLL search order hijacking. For the sake of persistence, the module sets the newly created WerFault.exe to autorun, creating a Windows Problem Reporting value in the SoftwareMicrosoftWindowsCurrentVersionRun Windows system registry branch.
The dropper not only puts the launcher on disk for side-loading, but also writes information messages with shellcode into existing Windows KMS event log
The dropped wer.dll is a loader and wouldn’t do any harm without the shellcode hidden in Windows event logs. The dropper searches the event logs for records with category 0x4142 (“AB” in ASCII) and having the Key Management Service as a source. If none is found, the 8KB chunks of shellcode are written into the information logging messages via the ReportEvent() Windows API function (lpRawData parameter). Created event IDs are automatically incremented, starting from 1423.
Launcher in wer.dll
This launcher, dropped into the Tasks directory by the first stager, proxies all calls to wer.dll and its exports to the original legitimate library. At the entry point, a separate thread combines all the aforementioned 8KB pieces into a complete shellcode and runs it. The same virtual address space, created by a copy of the legitimate WerFault.exe, is used for all this code.
To prevent WerFault continuing its error handling process, the DLL patches the launcher’s entry point with typical Blackbone trampolines
The way to stop the legitimate launcher’s execution isn’t traditional. In the main thread, wer.dll finds its entry point and patches it with a simple function. WaitAndExit() on the screenshot above would just call WaitForSingleObject() with the log gathering thread id and then exit, meaning no real WerFault.exe error handling code could ever be executed: the spoofed DLL mapped into its address space would block it.
Shellcode into Windows event logs
The launcher transmits control to the very first byte of the gathered shellcode. Here, three arguments for the next function are prepared:
- Address of next stage Trojan. It is also contained within the data extracted from the event logs
- The standard ROR13 hash of exported function name Load inside this Trojan (0xE124D840)
- Addresses of the string “dave” and constant “4”, which become the arguments of the exported function, found by hash
The parsing of the next Windows portable executable to locate its entry point is quite typical. To make the next stage Trojan less visible, the actor wiped the “MZ” magic in its header. After calling the code at the Trojan’s entry point, the shellcode also searches for the requested export and invokes it.
Besides searching for the entry point and calling it, the shellcode also searches for a Trojan export by hardcoded hash and runs the found function with arguments “dave” and “4”
For last stagers we will be a bit more detailed than for auxiliary modules before. The C++ module obviously used the code from SilentBreak’s (now NetSPI’s) Throwback public repository: XOR-based encryption function, original file name for some samples, e.g., ThrowbackDLL.dll, etc. Let us start here with the aforementioned Load() exported function. It’s just like the patching of WerFault above (the function waits on the main Trojan thread) but it ignores any parameters, so “dave” and “4” are unused. It is possible this launcher supports more modules than just this one, which would require parameters.
The module decrypts C2 domains with a one- byte XOR key. In the case of this sample there is only one domain, eleed[.]online. The Trojan is able to handle many of them, separated by the “|” character and encrypted. For further communications over plain HTTP, the Trojan chooses a random C2 from this set with user agent “Mozilla 5.0”.
The malware generates a fingerprinting string by gathering the following information, also separated by “|’:
- Values of MachineGUID from the SOFTWAREMicrosoftCryptography
- Computer name
- Local IP addresses obtained with GetAdaptersInfo
- Architecture (x86 or x64)
- OS version
- Whether the current process has SeDebugPrivilege
The fingerprinter also appends “1.1” to the string (which could be the malware version) and the sleep time from the current config.
Encrypted HTTP communication with C2
Before HTTP communications, the module sends empty (but still encrypted) data in an ICMP packet to check connection, using a hardcoded 32-byte long RC4 key. Like any other strings, this key is encrypted with the Throwback XOR-based algorithm.
If the ping of a control server with port 80 available is successful, the aforementioned fingerprint data is sent to it. In reply, the C2 shares the encrypted command for the Trojan’s main loop.
|0||Fingerprint the target again.|
|1||Execute command. The Trojan executes the received command in the new process and sends the result back to the C2.|
|2||Download from a URL and save to the given path.|
|3||Set a new sleep time. This time in minutes is used as a timeout if the C2 hasn’t replied with a command to execute yet. Formula for randomization is (random number between 0,9 – 1,1) * sleep time.|
|4||Sleep the given number of minutes without changing the configuration.|
|5||List processes with PID, path, owner, name and parent data.|
|6||Inject and run shellcode into the target process’ address space. To inject into the same process, the command argument should be “local”. Like the shellcode in the event logs, this one would run the provided PE’s entry point and as well as a specific export found by hash.|
|99||Terminates the session between trojan and C2.|
Another Trojan in use during this campaign is named pipe-based and has a more profound command system, including privilege escalation, screenshotting, inactivity time measurement, etc. Here, we come to the infection chain end. We continue with another last stage Trojan type, which we observed injected into processes like edge.exe.
Named pipes-based Trojan
The Trojan location is C:Windowsapds.dll. The original legitimate Microsoft Help Data Services Module library with the same name is in C:WindowsSystem32. The main Trojan working cycle is in a separate thread. The malware also exports a Load() function, whose only purpose is to wait for a working thread, which is typical for this campaign’s modules.
First, the main trojan thread gets the original apds.dll and exports and saves it into an allocated new heap buffer right after the Trojan’s image in memory. Then the Trojan edits the self-exported functions data in a way that allows it to call the original apds.dll exports through the crafted stubs like the following, where the address is the one parsed from the real apds.dll:
48B8<addr> MOV RAX,<addr>
FFE0 JMP RAX
This trampoline code is taken from the Blackbone Windows memory hacking library (RemoteMemory::BuildTrampoline function). DLL hijacking isn’t something new, we have seen such a technique used to proxy legitimate functions many times, but recreating self-exports with just short stubs to call the original legitimate functions is unusual. The module then creates a duplex-named pipe, “MonolithPipe”, and enters its main loop.
After the aforementioned manipulations with exported functions, the module lightly fingerprints the host with architecture and Windows version information. The Trojan also initializes a random 11-byte ASCII string using the rare constant mentioned, e.g., here in the init_keys function. The result serves as a unique session id.
The malware connects to the hardcoded domain on port 443 (in this case https://opswat[.]info:443) and sends POST requests to submit.php on the C2 side. HTTPS connection options are set to accept self-signed certificates on the server side. The C2 communication in this case is encrypted with an RC4 algorithm with the Dhga(81K1!392-!(43 We have now covered the three layers of the campaign. Interestingly, we observed a Trojan with a complete command set as in the table above, but still using RC4-encrypted HTTP communications with the C2 instead of named pipes. The last stage samples look like a modular platform, whose capabilities the actor is able to combine according to their current needs. The code, which we consider custom (Trojans, wrappers), has no similarities with previously known campaigns or previously registered SilentBreak toolset modules. Right now we prefer not to name the activity and instead stick to just “SilentBreak” given it is the most used among the tools here. If new modules appear and allow us to connect the activity to some actor we will update the name accordingly. We consider the event logs technique, which we haven’t seen before, the most innovative part of this campaign. With at least two commercial products in use, plus several types of last-stage RAT and anti-detection wrappers, the actor behind this campaign is quite capable. There is the possibility that some of the modules we described here as custom ones are part of a commercial toolset as well. The code is quite unique, with no similarities to known malware. We will continue to monitor similar activity. In the Targeted Malware Reverse Engineering training course, Kaspersky experts share its best and most valuable practices to build a safer world. Learn more about targeted malware with Denis Legezo and other GReAT experts at: https://kas.pr/bgy7 Anti-detection wrappers/decryptors/launchers, not malicious by themselves C:WindowsTaskswer.dll C:Usersadminsourcereposdrxx64Releasesb.pdb
Set the “continue” flag to False and stop working.
N/A, reserved so far.
Get time since the last user input in minutes.
Get current process information: PID, architecture, user, path, etc.
Get host domain and user account.
Impersonate user with credentials provided.
Get current process’s available privileges.
Execute command with the cmd.exe interpreter.
Test connection with a given host (address and port) using a raw TCP socket.
Get running processes information: path, owner, name, parent, PID, etc.
Impersonate user with the token of the process with a provided ID.
List files in directory.
Take a screenshot.
Drop content to file.
Read content from file
Inject provided code into process with the given name.
Run shellcode from the C2.
N/A, reserved so far.
Run PowerShell script. During this campaign we observed Invoke-ReflectivePEInjection to reflectively load Mimikatz in memory and harvest credentials.
Jan 15, 2022
63949 – Linode
63949 – Linode
Jan 17, 2022
44925 – The 1984
Jan 17, 2022
44925 – The 1984
Aug 20, 2021
22612 – Namecheap
Jan 17, 2022
213038 – DreamVPS
Jan 11, 2022
63949 – Linode
63949 – Linode
Indicators of Compromise
File Hashes (malicious documents, trojans, emails, decoys)
C:WindowsTasksWerFault.exe copy of the legit one to sideload the malicious .dll
Named pipe MonolithPipe
Event logs with category 0x4142 in Key Management Service source. Events ID auto increments starting from 1423.
We have now covered the three layers of the campaign. Interestingly, we observed a Trojan with a complete command set as in the table above, but still using RC4-encrypted HTTP communications with the C2 instead of named pipes. The last stage samples look like a modular platform, whose capabilities the actor is able to combine according to their current needs.
The code, which we consider custom (Trojans, wrappers), has no similarities with previously known campaigns or previously registered SilentBreak toolset modules. Right now we prefer not to name the activity and instead stick to just “SilentBreak” given it is the most used among the tools here. If new modules appear and allow us to connect the activity to some actor we will update the name accordingly.
We consider the event logs technique, which we haven’t seen before, the most innovative part of this campaign. With at least two commercial products in use, plus several types of last-stage RAT and anti-detection wrappers, the actor behind this campaign is quite capable. There is the possibility that some of the modules we described here as custom ones are part of a commercial toolset as well. The code is quite unique, with no similarities to known malware. We will continue to monitor similar activity.
In the Targeted Malware Reverse Engineering training course, Kaspersky experts share its best and most valuable practices to build a safer world. Learn more about targeted malware with Denis Legezo and other GReAT experts at: https://kas.pr/bgy7
Anti-detection wrappers/decryptors/launchers, not malicious by themselves